How to use Maxidiag EU702 Scanner to reset OBD2 codes?

Do you know how to use Maxidiag EU702 Scanner to reset OBD2 codes? OBD2 codes let you know some fault-code about your cars,it is obd2 wrong with your car’s engine.Here EOBD2 will share you installation guide.

Autel MaxiDiag EU702 European car scanner EU702 trouble reader

1.Connect your vehicle’s diagnostic terminal, usually called the Assembly Line Diagnostic Link (ALDL), to Maxidiag EU702 code scanner and turn the ignition on. The Autel EU702 scanner reads the codes stored , and then show you the option to clear them. Select that option of MaxiDiag EU702 Code Scanner.

2.Disconnect the Maxidiag EU702 Scanner with your car . Remove the OBD-ii cable of Auto Diagnostic OBD Maxidiag EU702, then open your car battery . Reconnect Maxidiag EU702 Scanner , using the OBD2 mode diagnostic the cars. This resets the engine codes in some vehicles,though it also interrupts other functions, such as the clock and the radio settings.

3.Force the error obd-ii code clearing by Maxidiag EU702 Scanner, driving forward several yards, then reversing several yards.Shut the engine off and repeat three times. This imitates the successful runs and shuts off the “check engine” light on the dash by the fourth crank.

4. Plug the Maxidiag EU702 scan tool into the access port. This is a 16-pin OBD-ii plug, and can only be oriented one way.

5. Press start button on the MaxiDiag EU702 Code Scanner tool. This will retrieve the engine codes. When the display reads “OK,” unplug the scan tool and shut off the ignition. Use your Focus’ service manual to translate the trouble codes (or see Resources).

For more information about Car Code Reader , please visit www.eobd2.net. EOBD2.net is a professional China OBD2 supplier. If you have any question, please feel free to contract us.

Learn more about Autel Maxidiag Elite»